EarthQuaker Devices Plumes Small Signal Shredder

EarthQuaker Devices  - Plumes - Small Signal Shredder

Plumes is a unique, all-analog approach to a classic tube-like overdrive circuit offering 3 different clipping voices, loads of headroom and almost three-dimensional clarity that will push your amp over the edge. The reimagined tone control is finely tuned to sculpt low end, clear top end, and focus midrange with blooming sustain.

Description

Design Notes

Plumes is an overdrive based around that classically overdone tube-like circuit you all know, and amps crave. While this particular circuit has been done to death, we here at EarthQuaker Devices brand of special effects pedals think the Plumes offers an original take on the old, tired dead horse everyone loves to beat on. You can’t get enough of it, so we are giving you some more. Doctor’s orders and what not….

For starters, they’ve done away with the sacred 4558 IC and the classic BJT transistor buffers and replaced them with JFET operational amplifiers and raised the input impedance to nearly 10 megaohms! This offers lower noise, better signal integrity and more chime in the high end. We power this OpAmp by taking the 9v input and internally converting it to +/- 9v to give it more headroom. The end result is a more three-dimensional tone with added clarity that really pushes a nice tube amp over the edge. You might notice how those badass leads you’re always ripping will blast over those awful, no good cymbals your drummer is constantly bashing around on. It sounds like diamonds…a million f**king diamonds!

They also added three different clipping options for your consideration. Mode 1 is symmetrical clipping utilizing a pair of light emitting diodes. This is the crunchiest setting the Plumes has to offer. When played through a clean amp, it’ll deliver a reasonable facsimile of that classic black and gold British valve amp tone. If you already set your amp dirty, using this mode will make it filthy. Mode 2 is clean boost mode. This eliminates the soft clipping diodes altogether and leaves you with straight OpAmp drive. This is perfect for pushing your clean tone out in front or driving the preamp of an already overdriven amp into tasteful breakup territory. Mode 3 is an asymmetrical silicon diode arrangement similar to the stock screamer but with more output and clean clarity; the tone some people describe as “transparent”. It’s almost as if your clean tone is blended in with a slightly less clean tone, ya know? Using this mode gives a warmer low-end response and lower output. It’s less hard on your amp and your ears. It’s a classic pleasant tone the whole band can enjoy.

Not enough for you? They also improved the way the classic tone control operates while still leaving it familiar enough to keep you warm and comfortable. It’s still a safe space, no worries in here. It’s now useful through the whole range. The low end is big and clear, and the high end is bright and cutting without killing the mids. Just the right amount of tonal tickling to excite those ear drums yet still give that familiar mid-heavy drive.

Features

Specs

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 25 mA
Input Impedance: 10 MΩ
Output Impedance: 100 Ω

Flexi-Switch Technology
This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

DO NOT RUN AT HIGHER VOLTAGES!

Shipping Policy

Flipside Music ships items within 2 days of purchase. UPS, FedEx or USPS will be the parcel carrier used to ship your purchase, if you have a preference for another shipping service provider, please contact Ike or Dylan and we will work with you and the company you choose.

International orders may be subject to destination countries sales, VAT or import tax. Please contact your country's duty center, prior to purchase for more information regarding these fees. Flipside Music will not reduce listed price to avoid said duties, taxes, or export/import fees.

Return Policy

New Items:

We honor a 14 day return window on all new items.

If you feel the need to return an item, it must be in the sellable condition, no paint chips, scratches or broken parts. Sellable Condition means that the product(s) is in exactly the same condition as it was when you received it. The item must have all the original packaging, included accessories owner’s manuals and blank warranty card, no sign of wear or abuse.

Used and Vintage Gear:

We honor a 3 day return window on all used and vintage items.

All our used gear is tested for functionality prior to being available for purchase and therefore only carries a 3 day approval period. If you would like to make a return just let us know within the 3 day window.

Damaged or Defective Items:

We visually inspect all items before shipment. If you believe you have received a damaged or defective product, please contact us immediately so we can work through the issue. Guitars, basses, and other equipment returned to us with pick marks, "buckle-rash", or any other damage or evidence of use may be subject to a 20% restocking fee, repair charge or disqualification of return. All items must be returned to us in the same condition they were when shipped to qualify. We reserve the right to refuse any return if we determine the item has been misused, modified or damaged by the purchaser. If the item turns out not to be defective upon inspection, we will have to deduct the cost of shipping from your return credit.

Shipping Charges incurred through the return of an item:

You will be responsible for the shipping charge for the return of your item, and if your item qualifies for Free shipping on its way to you, this shipping charge will also be deducted from your refund. If your item is determined to be defective, we will pay the shipping charge, equivalent to ground service.