FLIPSIDE MUSIC - 1673 S. ACOMA ST. DENVER, CO 80223 | MON-FRI: 12-6 SAT-SUN: 11-4
{"id":1447434125335,"title":"JHS Pedals Buffered Splitter AY-Split","handle":"jhs-pedals-buffered-splitter-ay-split","description":"\u003cp\u003e\u003cstrong\u003eJHS Pedals Buffered Splitter AY-Split \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer's Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you’ve ever split your guitar’s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple and effective signal-splitting device\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are a ton of applications for adding a Buffered Splitter to your signal chain. Whether moving a tuner out of line or running a dual-amp setup, once you use the JHS Buffered Splitter, you’ll never be without one again. Here are just a few options.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSend one signal to a tuner that is out of the signal chain while retaining your full tone\u003c\/li\u003e\n\u003cli\u003eIn a dual-amp setup, both amplifiers will see a powerful, clean signal\u003c\/li\u003e\n\u003cli\u003eBassists can send one side to their amplifiers, while sending the other to the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKeeps your tone clear, powerful, and pristine\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you’re as pedal happy as we are at JHS, you’re going to want this quality buffer in your signal chain. The Buffered Splitter is like giving each output a shot of adrenaline, ensuring they hit your amp with the same strength and character as they left your fingers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConverts your guitar’s hi-Z signal to lo-Z for driving long cables and pedal chains\u003c\/li\u003e\n\u003cli\u003eRetains the original tone of your guitar without coloration from the other gear in your signal chain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConvenient low-profile design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA device such as the Buffered Splitter is content to be a workhorse piece of gear that quietly does its job in the background. That’s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall size is ideal for saving pedalboard space\u003c\/li\u003e\n\u003cli\u003eCan easily be mounted underneath your board\u003c\/li\u003e\n\u003cli\u003eBuilt rugged\u003c\/li\u003e\n\u003cli\u003eBlack powder coating keeps the buffer hidden in the background\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis pedal requires standard 9V DC Negative power, consumes less than 100mA, and measures 3.6\"x1.5\"x1\"\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2018-09-28T18:23:11-06:00","created_at":"2018-09-28T18:23:12-06:00","vendor":"JHS Pedals","type":"Effects","tags":["reverbsync:off","Splitter"],"price":8000,"price_min":8000,"price_max":8000,"available":true,"price_varies":false,"compare_at_price":8000,"compare_at_price_min":8000,"compare_at_price_max":8000,"compare_at_price_varies":false,"variants":[{"id":12732156477463,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BUFFSPLITTER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JHS Pedals Buffered Splitter AY-Split","public_title":null,"options":["Default Title"],"price":8000,"weight":907,"compare_at_price":8000,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"650415211272"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/jhs-pedals-Buffered_Splitter.png?v=1599177741"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/jhs-pedals-Buffered_Splitter.png?v=1599177741","options":["Title"],"media":[{"alt":null,"id":8044508446773,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/jhs-pedals-Buffered_Splitter.png?v=1599177741"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/jhs-pedals-Buffered_Splitter.png?v=1599177741","width":1000}],"content":"\u003cp\u003e\u003cstrong\u003eJHS Pedals Buffered Splitter AY-Split \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer's Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you’ve ever split your guitar’s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple and effective signal-splitting device\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are a ton of applications for adding a Buffered Splitter to your signal chain. Whether moving a tuner out of line or running a dual-amp setup, once you use the JHS Buffered Splitter, you’ll never be without one again. Here are just a few options.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSend one signal to a tuner that is out of the signal chain while retaining your full tone\u003c\/li\u003e\n\u003cli\u003eIn a dual-amp setup, both amplifiers will see a powerful, clean signal\u003c\/li\u003e\n\u003cli\u003eBassists can send one side to their amplifiers, while sending the other to the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKeeps your tone clear, powerful, and pristine\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you’re as pedal happy as we are at JHS, you’re going to want this quality buffer in your signal chain. The Buffered Splitter is like giving each output a shot of adrenaline, ensuring they hit your amp with the same strength and character as they left your fingers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConverts your guitar’s hi-Z signal to lo-Z for driving long cables and pedal chains\u003c\/li\u003e\n\u003cli\u003eRetains the original tone of your guitar without coloration from the other gear in your signal chain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConvenient low-profile design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA device such as the Buffered Splitter is content to be a workhorse piece of gear that quietly does its job in the background. That’s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall size is ideal for saving pedalboard space\u003c\/li\u003e\n\u003cli\u003eCan easily be mounted underneath your board\u003c\/li\u003e\n\u003cli\u003eBuilt rugged\u003c\/li\u003e\n\u003cli\u003eBlack powder coating keeps the buffer hidden in the background\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis pedal requires standard 9V DC Negative power, consumes less than 100mA, and measures 3.6\"x1.5\"x1\"\u003c\/strong\u003e\u003c\/p\u003e"}

JHS Pedals Buffered Splitter AY-Split

Product Description

Maximum quantity available reached.

JHS Pedals Buffered Splitter AY-Split 

Manufacturer's Description:

There are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you’ve ever split your guitar’s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.

Simple and effective signal-splitting device

There are a ton of applications for adding a Buffered Splitter to your signal chain. Whether moving a tuner out of line or running a dual-amp setup, once you use the JHS Buffered Splitter, you’ll never be without one again. Here are just a few options.

  • Send one signal to a tuner that is out of the signal chain while retaining your full tone
  • In a dual-amp setup, both amplifiers will see a powerful, clean signal
  • Bassists can send one side to their amplifiers, while sending the other to the board

Keeps your tone clear, powerful, and pristine

If you’re as pedal happy as we are at JHS, you’re going to want this quality buffer in your signal chain. The Buffered Splitter is like giving each output a shot of adrenaline, ensuring they hit your amp with the same strength and character as they left your fingers.

  • Converts your guitar’s hi-Z signal to lo-Z for driving long cables and pedal chains
  • Retains the original tone of your guitar without coloration from the other gear in your signal chain

Convenient low-profile design

A device such as the Buffered Splitter is content to be a workhorse piece of gear that quietly does its job in the background. That’s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.

  • Small size is ideal for saving pedalboard space
  • Can easily be mounted underneath your board
  • Built rugged
  • Black powder coating keeps the buffer hidden in the background

This pedal requires standard 9V DC Negative power, consumes less than 100mA, and measures 3.6"x1.5"x1"

Sku: BUFFSPLITTER
Vendor: JHS Pedals