FLIPSIDE MUSIC - 1673 S. ACOMA ST. DENVER, CO 80223 | MON-FRI: 12-6 SAT-SUN: 11-4
{"id":4554181607477,"title":"Walrus Audio EB-10 Preamp EQ\/Boost Pedal - Matte Black","handle":"walrus-audio-eb-10-preamp-eq-boost-pedal","description":"\u003cp class=\"p1\"\u003e\u003cstrong\u003eWalrus Audio EB-10 Preamp EQ\/Boost Pedal - Matte Black\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eA tone tweakers delight, the EB-10 works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting.\u003c\/p\u003e\n[TABS]\n\u003ch5\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e The EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eEach rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.\u003c\/p\u003e\n\u003cp\u003eUse the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had. \u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eSpecs\u003c\/b\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe EB-10 comes coated in Prismatic Powders, Matte Black and Cream enclosures with art inspired by vintage studio equipment. Design by Tyler Evans.\u003c\/li\u003e\n\u003cli\u003eThe die-cast enclosure’s exact size is 3.68” x 4.67” x 1.547”.\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC, center negative (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cb\u003eReviews\u003c\/b\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cb\u003eShipping\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cb\u003eShipping Policy\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFlipside Music ships items within 2 days of purchase. UPS, FedEx or USPS will be used to ship your purchase, if you have a preference for another shipping provider, please contact Ike or Dylan and we will work with you and the company you choose.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInternational orders may be subject to destination countries sales, VAT or import tax. Please contact your country's duty center, prior to purchase for more information regarding these fees. Flipside Music will not reduce listed price to avoid said duties.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eReturn Policy\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cb\u003eNew Items\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWe honor a 14 day return window on all new items.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIf you feel the need to return an item, it must be in the sellable condition, no paint chips, scratches or broken parts. Sellable Condition means that the product(s) is in exactly the same condition as it was when you received it. The item must have all the original packaging, included accessories owner’s manuals and blank warranty card, no sign of wear or abuse.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUsed and Vintage Gear\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWe honor a 3 day return window on all used and vintage items.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAll our used gear is tested for functionality prior to being available for purchase and therefore only carries a 3 day approval period. If you would like to make a return just let us know within the 3 day window.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDamaged or Defective Items\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWe visually inspect all items before shipment. If you believe you have received a damaged or defective product, please contact us immediately so we can work through the issue. Guitars, basses, and other equipment returned to us with pick marks, \"buckle-rash\", or any other damage or evidence of use may be subject to a 20% restocking fee, repair charge or disqualification of return. All items must be returned to us in the same condition they were when shipped to qualify. We reserve the right to refuse any return if we determine the item has been misused, modified or damaged by the purchaser. If the item turns out not to be defective upon inspection, we will have to deduct the cost of shipping from your return credit.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShipping Charges\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eYou will be responsible for the shipping charge for the return of your item, and if your item qualifies for Free shipping on its way to you, this shipping charge will also be deducted from your refund. If your item is determined to be defective, we will pay the shipping charge, equivalent to ground service.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eMisc\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2020-05-09T08:57:06-06:00","created_at":"2020-05-09T09:05:04-06:00","vendor":"Walrus Audio","type":"Effects","tags":["Boost","EQ","Preamp","reverbsync-condition:Brand New","reverbsync-offers:off","reverbsync-shipping-profile:Free"],"price":19900,"price_min":19900,"price_max":19900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31973745524789,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EB-10","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Walrus Audio EB-10 Preamp EQ\/Boost Pedal - Matte Black","public_title":null,"options":["Default Title"],"price":19900,"weight":907,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"810424031838","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Face.jpg?v=1589928841","\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Left.jpg?v=1589928904","\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Right.jpg?v=1589928910"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Face.jpg?v=1589928841","options":["Title"],"media":[{"alt":null,"id":7197956309045,"position":1,"preview_image":{"aspect_ratio":0.86,"height":615,"width":529,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Face.jpg?v=1589928841"},"aspect_ratio":0.86,"height":615,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Face.jpg?v=1589928841","width":529},{"alt":null,"id":7197961977909,"position":2,"preview_image":{"aspect_ratio":0.924,"height":630,"width":582,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Left.jpg?v=1589928904"},"aspect_ratio":0.924,"height":630,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Left.jpg?v=1589928904","width":582},{"alt":null,"id":7197962436661,"position":3,"preview_image":{"aspect_ratio":0.893,"height":635,"width":567,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Right.jpg?v=1589928910"},"aspect_ratio":0.893,"height":635,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0987\/8460\/products\/Walrus-Audio-EB-10-EQ-Boost-Right.jpg?v=1589928910","width":567}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp class=\"p1\"\u003e\u003cstrong\u003eWalrus Audio EB-10 Preamp EQ\/Boost Pedal - Matte Black\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eA tone tweakers delight, the EB-10 works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting.\u003c\/p\u003e\n[TABS]\n\u003ch5\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e The EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eEach rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.\u003c\/p\u003e\n\u003cp\u003eUse the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had. \u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eSpecs\u003c\/b\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe EB-10 comes coated in Prismatic Powders, Matte Black and Cream enclosures with art inspired by vintage studio equipment. Design by Tyler Evans.\u003c\/li\u003e\n\u003cli\u003eThe die-cast enclosure’s exact size is 3.68” x 4.67” x 1.547”.\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC, center negative (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cb\u003eReviews\u003c\/b\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cb\u003eShipping\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cb\u003eShipping Policy\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFlipside Music ships items within 2 days of purchase. UPS, FedEx or USPS will be used to ship your purchase, if you have a preference for another shipping provider, please contact Ike or Dylan and we will work with you and the company you choose.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInternational orders may be subject to destination countries sales, VAT or import tax. Please contact your country's duty center, prior to purchase for more information regarding these fees. Flipside Music will not reduce listed price to avoid said duties.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eReturn Policy\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cb\u003eNew Items\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWe honor a 14 day return window on all new items.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIf you feel the need to return an item, it must be in the sellable condition, no paint chips, scratches or broken parts. Sellable Condition means that the product(s) is in exactly the same condition as it was when you received it. The item must have all the original packaging, included accessories owner’s manuals and blank warranty card, no sign of wear or abuse.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUsed and Vintage Gear\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWe honor a 3 day return window on all used and vintage items.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAll our used gear is tested for functionality prior to being available for purchase and therefore only carries a 3 day approval period. If you would like to make a return just let us know within the 3 day window.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDamaged or Defective Items\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWe visually inspect all items before shipment. If you believe you have received a damaged or defective product, please contact us immediately so we can work through the issue. Guitars, basses, and other equipment returned to us with pick marks, \"buckle-rash\", or any other damage or evidence of use may be subject to a 20% restocking fee, repair charge or disqualification of return. All items must be returned to us in the same condition they were when shipped to qualify. We reserve the right to refuse any return if we determine the item has been misused, modified or damaged by the purchaser. If the item turns out not to be defective upon inspection, we will have to deduct the cost of shipping from your return credit.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShipping Charges\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eYou will be responsible for the shipping charge for the return of your item, and if your item qualifies for Free shipping on its way to you, this shipping charge will also be deducted from your refund. If your item is determined to be defective, we will pay the shipping charge, equivalent to ground service.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003eMisc\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e"}

Walrus Audio EB-10 Preamp EQ/Boost Pedal - Matte Black

Product Description

Maximum quantity available reached.

Walrus Audio EB-10 Preamp EQ/Boost Pedal - Matte Black

A tone tweakers delight, the EB-10 works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting.

Sku: EB-10
Vendor: Walrus Audio

 The EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.

Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.

Use the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had. 

  • The EB-10 comes coated in Prismatic Powders, Matte Black and Cream enclosures with art inspired by vintage studio equipment. Design by Tyler Evans.
  • The die-cast enclosure’s exact size is 3.68” x 4.67” x 1.547”.
  • Power requirements are 9VDC, center negative (100mA minimum).
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
  • Power supply not included.

Shipping Policy

Flipside Music ships items within 2 days of purchase. UPS, FedEx or USPS will be used to ship your purchase, if you have a preference for another shipping provider, please contact Ike or Dylan and we will work with you and the company you choose.


International orders may be subject to destination countries sales, VAT or import tax. Please contact your country's duty center, prior to purchase for more information regarding these fees. Flipside Music will not reduce listed price to avoid said duties.

New Items

We honor a 14 day return window on all new items.

If you feel the need to return an item, it must be in the sellable condition, no paint chips, scratches or broken parts. Sellable Condition means that the product(s) is in exactly the same condition as it was when you received it. The item must have all the original packaging, included accessories owner’s manuals and blank warranty card, no sign of wear or abuse.

Used and Vintage Gear

We honor a 3 day return window on all used and vintage items.

All our used gear is tested for functionality prior to being available for purchase and therefore only carries a 3 day approval period. If you would like to make a return just let us know within the 3 day window.


Damaged or Defective Items

We visually inspect all items before shipment. If you believe you have received a damaged or defective product, please contact us immediately so we can work through the issue. Guitars, basses, and other equipment returned to us with pick marks, "buckle-rash", or any other damage or evidence of use may be subject to a 20% restocking fee, repair charge or disqualification of return. All items must be returned to us in the same condition they were when shipped to qualify. We reserve the right to refuse any return if we determine the item has been misused, modified or damaged by the purchaser. If the item turns out not to be defective upon inspection, we will have to deduct the cost of shipping from your return credit.


Shipping Charges

You will be responsible for the shipping charge for the return of your item, and if your item qualifies for Free shipping on its way to you, this shipping charge will also be deducted from your refund. If your item is determined to be defective, we will pay the shipping charge, equivalent to ground service.